In my previous post, “A Study in Serifs: Part 2,” I referenced a poem.
Someone asked for it. So here it is:
Once Because…
Once because “Truth is stranger than
Fiction,” the Byzantine fell
Coincident with the True.
That they could follow Truth for the wrong reason
Gave them white hair.
If you ask them about it
They put on the mask of the reticent father,
Whose sense of history
Demands History be his judge.
Instead one of them told me, “Genius
Is to be feared. Trust me, there is danger
In knowing too
Much. Kiekegaard and Nietchze for example
Who were so smart they were unhappy.”
Consequently they are benign, beneficent
And, if there is such a word,
Polypleasant. They are also evil.
In an inventory
They are the term that cannot be right.
It comes from not caring. They don’t care
Because inventories
Are like January White Sales
And words are marked down
Like this: “The word for Trust
Should parallel Choice. And the word for Choice is
Keeping the options open.”
Copyright ©2011 Philip Gallo
Friday, October 14, 2011
Saturday, September 24, 2011
A Study In Serifs: Part 2
Recently I set some type for an inscription that was to be sandblasted into limestone.
The client was not conversant with typeface nomenclature, but told me that the setting supplied by the landscape architect was too “heavy and clunky.”
On screen the PDF file looked all right, but when I magnified the type to its correct size (3-inch cap height) I could see that the serifs were squared off and the strokes of the characters too uniform.
The real problem here is that the drawing for the typeface was not optimized for display at extremely large sizes. Consequently the serifs, which at text size, seem sharp, are blunt at the large size. And the vertical strokes, which at text size seem crisp, are more like parallel bars at the larger size.
The concept of typeface families is a way of meliorating this problem, where the Thin, Extra Light and Light versions are intended for large display work. Unfortunately there was no adequate display version available.
I ended up suggesting Centaur as a replacement, as I thought that Centaur maintained the correct balance, between stressed strokes and bracketed serifs. Pictured below is the Centaur overlaid the supplied sample: Minion Pro.

An obvious choice might have been Trajan, but I was disinclined as that has become as ubiquitous as Palatino became in the 80s. Nevertheless I did review it, and thought that in this instance, the Centaur was superior.
Of course, my choice may not be a definitive solution. So I invite others to peruse their typeface collection and offer an alternative*.
*By the way, there is a difference between alternative and choice. And as a matter of fact I happen to have a poem on the subject.
The client was not conversant with typeface nomenclature, but told me that the setting supplied by the landscape architect was too “heavy and clunky.”
On screen the PDF file looked all right, but when I magnified the type to its correct size (3-inch cap height) I could see that the serifs were squared off and the strokes of the characters too uniform.
The real problem here is that the drawing for the typeface was not optimized for display at extremely large sizes. Consequently the serifs, which at text size, seem sharp, are blunt at the large size. And the vertical strokes, which at text size seem crisp, are more like parallel bars at the larger size.
The concept of typeface families is a way of meliorating this problem, where the Thin, Extra Light and Light versions are intended for large display work. Unfortunately there was no adequate display version available.
I ended up suggesting Centaur as a replacement, as I thought that Centaur maintained the correct balance, between stressed strokes and bracketed serifs. Pictured below is the Centaur overlaid the supplied sample: Minion Pro.

An obvious choice might have been Trajan, but I was disinclined as that has become as ubiquitous as Palatino became in the 80s. Nevertheless I did review it, and thought that in this instance, the Centaur was superior.
Of course, my choice may not be a definitive solution. So I invite others to peruse their typeface collection and offer an alternative*.
*By the way, there is a difference between alternative and choice. And as a matter of fact I happen to have a poem on the subject.
Wednesday, August 31, 2011
A Study In Serifs: Part 1

If you have ever had to identify a typeface so that a correction can be made to existing copy, you may have had to resort to a magnifying glass in order to assess the weight of a stressed or unstressed stroke, or to reveal the mystery of the serif in its many manifestations.
But what happens when you D-I-V-O-R-C-E these serifs from their original letterforms? Well, if you have any talent, you might come up with something similar to what the visual poet Scott Helmes has created in his Haiku Series, poems constructed entirely from parts of letters.
And where better to explore the straight line tangent to the curve than in the pages of Harper’s Bazarre, the exquisitely balanced female form complementing the full-figured Ultra Bodoni, and her pale companion, the anorexic Hoefler Didot?
Above: Haiku #92 [letterpress on Fabriano and Arches; 6x7 inches]. Copyright ©2011 Scott Helmes
Below: a cut-up letter from Harper’s Bazarre
Friday, July 22, 2011
Dreaded Trip Spring Dilemma
Print. Trip. Print. Trip. Probably you’re so used to Trip/Print you’ve never thought what might happen if that Trip lever was not working. Well, the press would print the cylinder on the return stroke.
Or as happened recently on my SP25, what if the whole mechanism locked up, and you couldn’t even advance the cylinder beyond the feed board.
When that happens, it's time to consult the manual and study the intricacies of the print/trip mechanism and the “trip spring” which actuates the whole thing.




Shown are four pictures I took while I and a fellow printer removed the side plate from the cylinder in order to get at the broken trip spring.
The first picture shows the undercarriage, with the print lever lodged behind the trip roller. As I could not advance the carriage from the feed table I was unable to get at the trip spring.
Otherwise I could have got at the broken spring, when I ran the cylinder to the end of the press bed.
Go to Vanderblog
Once we got the side plate off, the broken spring was quite apparent. On close examination of the break, it appeared as if the spring had broken a long time ago, as the break was dirty, and the broken half was nowhere to be found.
(The press is operational with only one spring.)
As to how the print lever got hung up behind the trip roller: I think that may have happened when I “short-stroked” the cylinder. That is, I advanced it in Print, then changed my mind and brought it back, without having gone far enough to go into Trip.
As a rule I always complete a print cycle, even if I know the sheet is misregistered; as once you get into the middle of the press and try to return the cylinder, the sheet can hang up and catch in the rollers, creating a very inky mess.
I received considerable advice from friends and colleagues, most notably, Paul Moxon, who sent me a list of the steps in removing the side plate.
(Note in the upper-right-hand corner of the second photograph, what may be called a synchronistic curiosity or prestidigitation: the tiny No. 01 Ball Bearing Vandercook Proof Press, seemingly tucked under the feed table of the SP25.)
Or as happened recently on my SP25, what if the whole mechanism locked up, and you couldn’t even advance the cylinder beyond the feed board.
When that happens, it's time to consult the manual and study the intricacies of the print/trip mechanism and the “trip spring” which actuates the whole thing.




Shown are four pictures I took while I and a fellow printer removed the side plate from the cylinder in order to get at the broken trip spring.
The first picture shows the undercarriage, with the print lever lodged behind the trip roller. As I could not advance the carriage from the feed table I was unable to get at the trip spring.
Otherwise I could have got at the broken spring, when I ran the cylinder to the end of the press bed.
Go to Vanderblog
Once we got the side plate off, the broken spring was quite apparent. On close examination of the break, it appeared as if the spring had broken a long time ago, as the break was dirty, and the broken half was nowhere to be found.
(The press is operational with only one spring.)
As to how the print lever got hung up behind the trip roller: I think that may have happened when I “short-stroked” the cylinder. That is, I advanced it in Print, then changed my mind and brought it back, without having gone far enough to go into Trip.
As a rule I always complete a print cycle, even if I know the sheet is misregistered; as once you get into the middle of the press and try to return the cylinder, the sheet can hang up and catch in the rollers, creating a very inky mess.
I received considerable advice from friends and colleagues, most notably, Paul Moxon, who sent me a list of the steps in removing the side plate.
So you are looking at removing:
- tie rods holding the two side plates together
- oscillator assembly
- roller support, if present
- trip bearings
(Note in the upper-right-hand corner of the second photograph, what may be called a synchronistic curiosity or prestidigitation: the tiny No. 01 Ball Bearing Vandercook Proof Press, seemingly tucked under the feed table of the SP25.)
Sunday, June 5, 2011
Practical Printer



I ran into a situation on a two-color job where I needed to print a polymer plate and type at the same time.
Fortunately I was running the two colors in quick succession by using two presses.
Pictured above is the print, followed by Press Number 1 with the black plate; then Press No. 2 with the red plate and the ornament. (Note the rule cut away on Press Number 1 to allow the ornament on Press No. 2 to fit into the gap.)
All of this was an expediency caused by the fact that although the job looked lively enough on screen, the print itself needed some help.
Hadn't I been able to do this, I would have had to revise the original file, output new film, and make new plates.
In the past ornaments of this kind were available from ATF in Handipacks. And any job printer would have had at least one case filled with ornaments.
Today however, with many printers exclusively running photopolymer, one might consider outputting film of ornaments so that should the occasion arise one would have some “ornaments” available.
(Of course, my saying this, implies also that I still do some “designing” on press.)
A good starting place might be the wonderful selection of penline flourishes available in Minion and Poetica. Many are similar to the Civilité ornaments, which at one time were available in ATF Handipack 73.
Something that might be kept in mind is selection of size. It is not by accident that the size differential in foundry ornaments goes up by 6 or 12 points at a time, as this is a sufficient jump in size to allow for various applications.
Now you can create you own “Handipacks.”
Thursday, May 19, 2011
nosh

Recently I applied for a grant, and in the process of assembling images, I was surprised to find so many that dealt with environmental issues.
So I decided to make that the focus of the application and came up with the necessary eight, one of which is posted here, done in 1986 with the assistance of Dean Lindblad.
I think that the selection of materials reflects the ambiguity of compromise involved in the potentially controversial aspect of a piece like this.
The plastic bag hangs from an industrial-grade stainless steel meat hook, which itself depends from a .25-inch by 3-inch by twenty-four inch aluminum bar fitted into a white pine box.
The paper is a handmade from Twin Rocker, with a brushed on, slightly thinned-out Lewis Roberts Venus Red.
The typeface is foundry metal 84-point Ludwig & Mayer Aurora Bold Condensed.
That is, in the making of the piece is there not a violation of the principle of the piece?
A little food for thought, perhaps, when next you find yourself perched at the bar with a raptor-like gaze.
Saturday, January 29, 2011
Reprehensibly Perfect

Pictured above is a composing stick with three lines of eight-point Eurostile Normal, set to a measure of fifty picas
AND
all caps, letterspaced with copper spaces, and word spaced two points using brass and copper.
With all that spacing material inserted between every character the line becomes so springy, that when you insert that last quad (colorized red) the whole line may buckle and spring out of the stick.
To prevent this I use a six or 12-point slug tight against the line before I insert that last quad—for purposes of illustration I have shown the slug pulled away and also colorized.
Note that the stick resides in a kind of cradle. If, for want of space in a crowded shop, you have ever set a half-filled stick down against a galley or typecase, only to see it slip and dump its contents, you may want to make a cradle like this.
But wait! Why would anyone set eight-point type all caps when all you have to do is hit CAPS LOCK or command-shift-K?
Good question. Which I think is rather neatly addressed in a poem by Philip Larkin, entitled The Poetry of Departures, the last line of which I have used to name this post.
A neat skewering, I think, of the Romantic Thrust. Or, another nail in the coffin of the handpress.
Friday, December 31, 2010
Forthcoming
I thought I would take advantage of this last day of the year to announce two books that I will be completing early 2011.
The first to hit the press will be a book of the Scottish Ballad, “Edward,” and which follows the text as given in Thomas Percy’s Reliques of Ancient English Poetry (Volume I. London: George Allen & Unwin Ltd., 1927 [as reprinted from the edition of Swan Sonneschien, 1885], p. 82-84); and which will also draw on some preliminary matter, elucidating the provenance of the text.
Set in American Uncial and printed on Rives BFK 180gsm, the book will include a drawing by the painter and master printmaker, David Rathman.
The second book, also set in American Uncial, is a story of my own making, entitled, “The Copyist.” It is quite short: 1500 words. Below is a proof of the first two paragraphs, and if you wish to read more you may download a pdf of the first two pages.

And were you to go to my post of Wednesday, June 30, 2010 you will see, put to another use, one of the galleys, already set.
The first to hit the press will be a book of the Scottish Ballad, “Edward,” and which follows the text as given in Thomas Percy’s Reliques of Ancient English Poetry (Volume I. London: George Allen & Unwin Ltd., 1927 [as reprinted from the edition of Swan Sonneschien, 1885], p. 82-84); and which will also draw on some preliminary matter, elucidating the provenance of the text.
Set in American Uncial and printed on Rives BFK 180gsm, the book will include a drawing by the painter and master printmaker, David Rathman.
The second book, also set in American Uncial, is a story of my own making, entitled, “The Copyist.” It is quite short: 1500 words. Below is a proof of the first two paragraphs, and if you wish to read more you may download a pdf of the first two pages.

And were you to go to my post of Wednesday, June 30, 2010 you will see, put to another use, one of the galleys, already set.
Saturday, December 25, 2010
Faux Faux Faux


I printed a few holiday cards this season. Two of them utilize techniques that may be of interest.
The first shows the creation of a fake deckle at the fore-edge of a card. By printing two cards as a work and turn, then folding, and tearing the long sheet in half, it is possible to fake a deckle.
Although the card shown here does not illustrate the possibility, one could print right up to the “deckle,” then tear. This is especially advantageous to those who print on the Vandercook.
The other card mixes laser printing with letterpress. Displayed is a compass rose that was printed on a Xerox Phaser 8560 laser printer, then blind embossed to give a faux “letterpress effect.”
As the Xerox 8560 holds very good register, I did not lose too many with the blind emboss. And I might say the same of the Epson Stylus Photo 2200 inkjet printer, which I have found also holds very good register.
(As for why I embossed the compass rose in the first place: anyone who has mixed inkjet printing with letterpress has noticed—and probably has been disappointed by—the flatness of inkjet against letterpress. The embossing goes a long ways toward meliorating this problem. And if you are still unhappy with the result, you might try adding a varnish to the embossing plate.)
Happy Holidays!
Philip Gallo at the Hermetic Press
Saturday, August 14, 2010
Ethertalk II

Instruction Set (c. 1992). Letterpress from original 8.5x11-inch copier paper. After the text had been printed, the outline was sketched around the text; scanned, then scaled and transformed to fit tangent top and bottom, left and right, after which, the outline was printed in gold ink.
Edition of 50. On Lenox (9.5x13.25-inches). April 2010.
Friday, July 16, 2010
A Well-Punkt Remark
One fine Saturday evening, the dinner party winding down, all at table sufficiently-oiled, and the Pinot Noir giving rise to world-class solutions to world-wide problems, what should Pop Up ! but the noösphere, enjoining our thoughts to commingle.
Years since I had read Teilhard de Chardin, it was time for review.
Such a surprise to find that in this excellent translation of The Phenomenon of Man (Bernard Wall, tr.; Harper & Row, Revised English edition, 1965) that the French style for handling punctuation had been observed:
I call attention especially to the exclamation point, which in modern typesetting—and especially in the case of sans serifs—is often set so tightly that the exclamation point reads as an errant “el.” A fault exacerbated with smaller point sizes, especially when digital type is converted to polymer plate for letterpress printing.
As a matter of fact, this is one of the “finer points” that Geoffrey Dowding outlines in his classic, Finer Points in the Spacing and Arrangement of Type.
Consequently when setting digital type for letterpress/bookwork, I routinely add two hair spaces (totaling 1/12 of an em in CS2) before the exclamation point or the question mark.* Character shape to the left and the right having such a strong influence on the relative placement of the semi-colon and colon, I adjust with unit spacing to the left and to the right.
Once you get used to the idea of punctuation as a thing unto itself, take a good look at the Bauer Bodoni or the Stradivarius exclamation point—or for that matter, the Futura Lite question mark, which looks like an upside-down capital “S” with a period centered under it.
Like good wine, they should be allowed to breathe.
*However, the prevailing style in advertising typography is quite the opposite—both the exclamation point and the question mark very tightly kerned to the adjacent character.
Years since I had read Teilhard de Chardin, it was time for review.
Such a surprise to find that in this excellent translation of The Phenomenon of Man (Bernard Wall, tr.; Harper & Row, Revised English edition, 1965) that the French style for handling punctuation had been observed:
The addition of a full word space before some punctuation: viz., the semi-colon, the colon, the exclamation point, and the question mark.
I call attention especially to the exclamation point, which in modern typesetting—and especially in the case of sans serifs—is often set so tightly that the exclamation point reads as an errant “el.” A fault exacerbated with smaller point sizes, especially when digital type is converted to polymer plate for letterpress printing.
As a matter of fact, this is one of the “finer points” that Geoffrey Dowding outlines in his classic, Finer Points in the Spacing and Arrangement of Type.
Consequently when setting digital type for letterpress/bookwork, I routinely add two hair spaces (totaling 1/12 of an em in CS2) before the exclamation point or the question mark.* Character shape to the left and the right having such a strong influence on the relative placement of the semi-colon and colon, I adjust with unit spacing to the left and to the right.
Once you get used to the idea of punctuation as a thing unto itself, take a good look at the Bauer Bodoni or the Stradivarius exclamation point—or for that matter, the Futura Lite question mark, which looks like an upside-down capital “S” with a period centered under it.
Like good wine, they should be allowed to breathe.
*However, the prevailing style in advertising typography is quite the opposite—both the exclamation point and the question mark very tightly kerned to the adjacent character.
Wednesday, June 30, 2010
Not Just. Nor Ordinary Left.

Ordinarily when you think flush left, you think of the line itself as flush left, disregarding the “nuclear level,” where the shapes of the characters themselves may or may not be flush left.
As characters necessarily reside on a body, whether real or not, some characters’ visual left may not coincide with other characters’ visual left.
Pictured above are a few lines of 14-point American Uncial, set flush left. Note the yellow spaces. Those are one-point brass spaces. Obscured are one-half point copper spaces following the em-quad.*
The reason for setting metal type like this is the ease with which it is possible to move characters closer to the edge by removing a brass or copper space, or combination thereof, to achieve optical alignment along the left edge of the page. The space removed can simply be added to the end of the line, thereby not affecting the tightness of the line.
This subtlety can now be achieved with digital type. Nigel French outlines this (see page 114 ) and many other aspects of typesetting in his all-encompassing book, InDesign Type: Professional Typography with Adobe® InDesign® CS2, 2006. (A revised edition is due out July 2010.)
For years the book I have constantly referred to has been Geoffrey Dowding’s Finer Points in the Spacing and Arrangement of Type. I still recommend this book—when it can be found— to the serious student of handset type. But for digital type InDesign Type pretty well supplants it.
*The purpose of the em-quad is to facilitate cracking open the form with less risk of pi-ing the type.
Saturday, March 20, 2010
Who Put the Space in the H&J?
In a previous post “Copy Out the Window” (28 Feb 2010) I wrote about composing a justified copy block. Those comments were directed toward copy editing.
But for fine-tuning your copy in inDesign, the most powerful tool available is the H&J dialogue box.

(Disregard auto-leading, as you should always specify a leading in Basic Character Formats).
By proper adjustment of the minimum and desired spacing you can arrive at a much better setting.
I say “arrive”, as you do not get there the very first time.
In fact, not only may you find it necessary to rebreak the lines, but you may find it necessary to change the original line length* a few points, if only to avoid an unfortunate hyphenation.
Consequently, you should check the Adobe Single-Line Composer box instead of the Adobe Paragraph-Composer box; otherwise you may not be able to hyphenate where you find it preferable.
The screen shot shows my initial settings at 80% / 85% / 90%, somewhat tighter than the default 85% / 100% / 133% of inDesign.
I then slowly decrease overall in 2-3% increments, though seldom do I go below 75% for the minimum.
If you are wondering what the percentages correspond to, the answer to that is that they are based on the width of the character space as specified by the font designer.
For a general discussion of the width of the character space in some everyday fonts go to Microsoft Typography.
You will see that the average space is 4-to-the-em.
A better choice of space for fine typography is 5-to-the-em.
If you’ve never set type by hand and don’t have the tactile experience of how large a 3- or 4-to-the-em space can be, compared to a 5- or 6-to-the-em space, here is a picture of 11-pt Monotype Bembo, three-points leaded:

But, because you are setting digital type you are not so limited.
You now have the capability of 5.25-to-the-em or 5.5-to-the-em. And that explains why the fields of the dialogue box are expressed in percentages.
*Remember this is a special case, a single paragraph.
But for fine-tuning your copy in inDesign, the most powerful tool available is the H&J dialogue box.

(Disregard auto-leading, as you should always specify a leading in Basic Character Formats).
By proper adjustment of the minimum and desired spacing you can arrive at a much better setting.
I say “arrive”, as you do not get there the very first time.
In fact, not only may you find it necessary to rebreak the lines, but you may find it necessary to change the original line length* a few points, if only to avoid an unfortunate hyphenation.
Consequently, you should check the Adobe Single-Line Composer box instead of the Adobe Paragraph-Composer box; otherwise you may not be able to hyphenate where you find it preferable.
The screen shot shows my initial settings at 80% / 85% / 90%, somewhat tighter than the default 85% / 100% / 133% of inDesign.
I then slowly decrease overall in 2-3% increments, though seldom do I go below 75% for the minimum.
If you are wondering what the percentages correspond to, the answer to that is that they are based on the width of the character space as specified by the font designer.
For a general discussion of the width of the character space in some everyday fonts go to Microsoft Typography.
You will see that the average space is 4-to-the-em.
A better choice of space for fine typography is 5-to-the-em.
If you’ve never set type by hand and don’t have the tactile experience of how large a 3- or 4-to-the-em space can be, compared to a 5- or 6-to-the-em space, here is a picture of 11-pt Monotype Bembo, three-points leaded:

But, because you are setting digital type you are not so limited.
You now have the capability of 5.25-to-the-em or 5.5-to-the-em. And that explains why the fields of the dialogue box are expressed in percentages.
*Remember this is a special case, a single paragraph.
Thursday, March 4, 2010
On Press / Off Press

My entry (#3837) of approximately 5,000 in the Minnesota Artists Exhibition Program (MAEP) “Foot in the Door 4”, showing at Minneapolis Institute of Arts: 19 February - 13 June 2010
An homage to the ubiquitous format of the 20th Century.
In the egalitarian spirit of the show*, I decided to use two incomplete fonts of wood type, setting the copy according to available characters (note the constructed T ); and adjusted baselines to accommodate the two different sizes.
Printed on 30# Canson Newsprint in Pantone 445.
* Any 2-dimensional work, of one foot square or less; or 3-dimensional work, of one cubic foot or less, was automatically entered into the show.
Sunday, February 28, 2010
Frisket-Carrier Sheet Revise

Several people have had questions about the sketch I posted on 8 January 2010, entitled Frisket-Carrier Sheet.
When I drew the sketch I should have shown that the two sheets are taped together to function as a unit.
Pictured is a replica of the one that I originally used to print the visual poem, daffydowndilly.
Note the inked line on the carrier sheet for registration of the word daffydowndilly to align with the crossbar of the ff ligature of the watermark.
Friday, February 26, 2010
Copy Out The Window
I remember a client whose stationery bore the headline DON’T CHANGE A WORD, printed in red, all caps in 96-point Franklin Gothic Bold Condensed.
For that client it was “Copy out the window.”
However as a veteran typographer I have often had to take many liberties with copy; and in some instances I was granted permission ahead of time to do so.
So I would offer an alternate setting. It might simply be an abbreviation or deletion of a superfluous word. Or the breaking out of a new paragraph from a long paragraph. Or the running together of two short paragraphs into one.
For the printer/bookartist this is especially important in the writing of a prospectus or colophon—and especially, artist statement—where one is trying to arrive at both a succinct statement and one that is typographically elegant. Nothing worse than a poorly set artist statement with a lonely widow at the end of the graph.
This may seem like a cynical approach to writing, but you might already have taken the first step down that road in having agreed to write an “artist statement” in the first place.
That last comment notwithstanding here is a little How-To.
Let us say you want a justified copy block with the last line going full measure. Experienced typographers work backwards. That is, they rework the last line of the paragraph first, then work towards the front. By working in this fashion should there be a difficult line you can sometimes “bury” it in the center of the graph.
Also this allows you more liberty in revising copy. And especially so, if the last line of the paragraph is a killer line that must be maintained.
Or you may simply want to create a triangular shaped ending to drop in a tailpiece as the early printers were inclined to do.
You may not be Edgar Allan Poe but there is no harm in knowing how to achieve an effect. That way when you want to show your stuff you will actually be able to do it. Like a triple Lutz, for instance.
For that client it was “Copy out the window.”
However as a veteran typographer I have often had to take many liberties with copy; and in some instances I was granted permission ahead of time to do so.
So I would offer an alternate setting. It might simply be an abbreviation or deletion of a superfluous word. Or the breaking out of a new paragraph from a long paragraph. Or the running together of two short paragraphs into one.
For the printer/bookartist this is especially important in the writing of a prospectus or colophon—and especially, artist statement—where one is trying to arrive at both a succinct statement and one that is typographically elegant. Nothing worse than a poorly set artist statement with a lonely widow at the end of the graph.
This may seem like a cynical approach to writing, but you might already have taken the first step down that road in having agreed to write an “artist statement” in the first place.
That last comment notwithstanding here is a little How-To.
Let us say you want a justified copy block with the last line going full measure. Experienced typographers work backwards. That is, they rework the last line of the paragraph first, then work towards the front. By working in this fashion should there be a difficult line you can sometimes “bury” it in the center of the graph.
Also this allows you more liberty in revising copy. And especially so, if the last line of the paragraph is a killer line that must be maintained.
Or you may simply want to create a triangular shaped ending to drop in a tailpiece as the early printers were inclined to do.
You may not be Edgar Allan Poe but there is no harm in knowing how to achieve an effect. That way when you want to show your stuff you will actually be able to do it. Like a triple Lutz, for instance.
Tuesday, February 2, 2010
Close to the Edge

Over the holidays I received a handmade card that had a double-colored hand-torn deckle edge. I liked the presentation of the colored deckle, and it suggested a typographic approach for a visual poem. (Now printed and shown above.)
I had some offcuts of Rives BFK which, as the deckle edge is relatively uniform, was the ideal paper for the job at hand. Unfortunately I didn’t have enough offcuts for the entire job, so I had to tear down some sheets by hand; but even those loaned themselves to the desired effect.
Part of the effect I was looking for was degrading of letterform as the type prints on the deckle. Encouraging me to do this is the fact that legibility studies have shown that the upper part of a letter is the most important in character recognition. As it turned out, however, degraded letterform did not come into play as much as I had anticipated.
For the baseline I used 8-Didot Inserat Grotesk—as it fit the deckle perfectly—and 12-Didot Permanent Headline for display, both original foundry faces from Haas and Ludwig & Mayer.
Appropos of these comments I offer this poem from A Printer’s Dozen.
The Truth About Margins
In the 20th Century we trim
To bleed. How unlike the ancients,
Who gravitated toward
The center of things. Now,
How close to the edge?
In this houseful of objects
Other men have made,
I recall Fairbank’s love of letters:
“Because he lacked facility
to draw.”
The generosity of genius,
And the anonymity of type—
Where to stop with other men’s ideas?
reprinted from A Printer's Dozen
Courtesy of The Bieler Press, Los Angeles.
©1992 — Philip Gallo
Friday, January 8, 2010
Frisket-Carrier Sheet

If you look closely at my previous post you will see that the word daffydowndilly aligns with the crossbar of the ff ligature. This alignment was accomplished by use of a frisket-carrier sheet, shown above.
The crossbar of the ligature served as a baseline (shown on the illustration as a horizontal line with two vertical tick marks) for the word daffydowndilly. A light-table made for quick alignment. When the second sheet of mylar with the window was laid down over the first, the handmade paper was sandwiched between and held firmly in place. This became the “key block” for subsequent runs.
Obviously a design of this sort does not require hairline registration, but one would like to find an optimal position and attempt to hold to it.
(As is often the case, one must exercise more control over the random than one would have imagined. Wait! I didn’t say that, did I?)
The frisket-carrier sheet simply went into the guides of the press. Use of this method allows you to print very irregular sheets on a cylinder press, while at the same time allowing you to “eyeball” centering up-and-down and left-and-right.
This same technique was used in the printing of some of the pages of Synesthesia (Granary Books: Terence McKenna and Timothy Ely, 1992). Only in that case, I printed the text type on the bottom mylar sheet; then aligned the painted image to the position where I wanted the type to print.
This technique was necessary as Timothy Ely had painted 30x44 inch sheets of Rives BFK, from which the individual pages were then cut. By use of a template Ely was able to duplicate image and placement with some accuracy, but not enough for me to ensure registration from sheet to sheet.
One of the printed pages is shown below.
Sunday, November 29, 2009
Defect in the Eye of the Beholder

Not only should you inspect the sheet immediately after having printed it, but you should inspect the sheet itself before printing it. If you don’t, long after the sheet has been printed, you may find a paper defect that makes it unusable.
The following is my rule of thumb, or should I say, disclaimer:
A defect that is sufficient to reject a sheet outright is a defect within the printed area or in such close proximity to the printed area that the defect in the paper may be mistaken as a defect in the printing.
All this appertains even more so when printing handmades, as you need to inspect the sheet both for inconsistency in weight from sheet to sheet, but for inconsistency within the sheet itself.
Pictured above is a handmade I commissioned for a visual poem. The inclusions in the paper are from daffodils. You know, real daffodils in real paper. The idea simply to take advantage of a chaotic field.
Before printing the sheets I separated them into three batches according to weight. I then went through the sheets and used as setup sheets those which I felt “inferior.” Some of these inferior sheets were caused by my having made the very large watermark ff ligature from too heavy a wire, a fault that should not be attributed to the papermaker.
The run was approximately 125, and involved several colors. By the end of the job I was hard pressed to maintain the standards with which I had begun. That is, even sheets that were “too thin” or “too heavy”; or sheets where the deckles were raggedly uneven, or worse, the watermark area too thin, exhibited merits exceeding the concept of the original run.
This is beginning to sound an awful lot like an argument for “the process is important as the work itself,” a position I do not adhere to. So perhaps it was the subject matter—the variant spellings of daffodil—which led to an acceptance of these “defects” as the natural order of things, and which led ultimately to my keeping sheets that ordinarily I would have discarded.
Hence my keeping the print shown above—in spite of the obvious flaw in the lower left corner and the weakness at the upper right.
For further thoughts along these lines I direct you to Nathaniel Hawthorne, who addresses the limitations of perfection quite elegantly in “The Artist of the Beautiful”; and especially for those who have ever tried to salvage a spoiled sheet, I recommend “The Birthmark.”
Thursday, November 12, 2009
Art of the Silent Correction

If you’ve ever changed copy in a colophon to go full measure or to lead gracefully into a decorative tailpiece, then you’re not that far removed from the copywriter who works directly with an art director and revises copy on the fly to fit available space.
Years ago, while reviewing page proofs for a book of my poems I was surprised to find a couple of errors that could not really be called typos. Instead they were word changes.
When I asked the printer—in this case the eminent private printer Harry Duncan—about them he said, “Yes,” in that wry tone one uses to acknowledge the self-evident.
Gently admonished by what is known in the trade as a “silent correction,” I had sense enough to let several stand.
And that, by the way, is exactly what stet., as used by proofreaders means: Let Stand. Literally that type has feet on which it stands, and that the form should remain intact.
Pictured Above: PLANTIN’S PROOF-READERS AT WORK. (FROM A PAINTING BY PIERRE VAN DER OUDERA, NOW IN POSSESSION OF FELIX GRISAR, ANTWERP.) As cited in A Printer’s Paradise, T. L. De Vinne. Click on the title bar of this post to read the original essay.
And my thanks to Patricia Kolsteeg, Registrar–Loans–Photo-orders, of the Plantin-Moretus Museum, whose kind search indicated that I was incorrect in thinking that the painting was in the collection of the Plantin-Moretus Museum.
Subscribe to:
Posts (Atom)